Tuesday, September 15, 2009

Windows 6.5 and Windows 6 Telstra rom for Jasjam

This is a techno-blog for the windows mobile users especially I-mate users for whom technical support is the question, now SUPPORT IMATE is available for all new as well as old users.


We have managed to cook windows 6.5 for Jasjam(thanks to tools i downloaded from XDA developers).The link for same is provided below


http://www.easy-share.com/1907768797/jasjam windows 6.5.zip

This is a cooked rom and will void your warranty.We will not be responsible for damage done to device due to this ,though if you face any issues ,we will provide email assistance..

Download the compressed file and extract it and save it in your computer

Before you run the ROM Upgrade Utility (RUU), make sure you check and do the following first:
1. USB sync cable is connected to the computer.
2. The standby and hibernation modes are disabled on the computer.
3. All running applications on the computer have been closed.
4. USB sync cable is connected to the Mobile Device to establish an ActiveSync connection with the computer.
5. Do not interact with your Mobile Device unless instructed to do so.

You will find ROM upgradation kit.Run it and follow the steps.This will first take the device into bootloader mode and it will automatically push Des's SSPL to your phone (As i said before thanks to XDA Developer for this as this downloaded upgrade consists of a ROM upgrade Utility made by Olipro in XDA developers)

It will then load the nbh file you will find in downloaded files which is the one i have cooked specifically for Jasjam.If the above lines confuse you forget them and just run the rom upgradation kit and patiently follow the steps for next 20 minutes.

The result will be sweeter,you will have windows 6.5......is,nt that great......

Now if you don,t wanna take the risk,the official rom for windows 5 is available at their website,however i have managed to get hold of windows 6 rom for telstra users which i have uploaded in link below.

http://www.easy-share.com/1907769213/RUU_Hermes_DL_UK_3.62.305.5_6275_1.54.30.10_108_Ship.exe


Download it and run it in similar way.This rom consists of few extra feature to make it easier for you to connect it to Telstra WAP sites.If you do not live in Australia and want the official windows rom ...wait I am in a process to extract the extra Telstra stuff and get the official windows 6 rom for you....

You face any issues with these ROM i will help you out,just mail me at sashaelectronics@hotmail.com

Thanks and Regards,

Support Imate
Posted by at

16 comments:

  1. UnknownOctober 15, 2009 at 10:48 PM

    Is there any WM6.5 for 8150?
    I realy hope for that.

    ReplyDelete
  2. Digitally Yours...October 23, 2009 at 2:16 AM

    Hey le...
    I am in process of cooking the same....let,s hope i complete it soon...I will upload it for you guys

    ReplyDelete
  3. chrisOctober 23, 2009 at 10:36 PM

    What about for the 9502?. Would really appreciate the 6.5 rom for that as well

    ReplyDelete
  4. UnknownNovember 3, 2009 at 2:53 AM

    Is there a cooked WM6.5 with Tel$tra settings for JasJam available?

    ReplyDelete
  5. AnonymousDecember 3, 2009 at 7:08 AM

    JUST A WEEK BEFORE ONLY I HAVE PURCHASED IMATE 9502. WITHIN TWO DAYS SPEAKERS ARE NOT WORKING PROPERLY. ANYTIME SPEAKERS, BOTH EAR PIECE AND BACK SPEAKERS MAY NOT WORK. IF WE INSERT HEAD PHONE AND IF WE TRY SOME INSERTS AND REMOVES, THEN AFTER SOME TIME THE SPEAKERS MAY WORK. HENCE I HAVE TO KEEP THE HAED PHONE ALWAYS WITH ME AS A EMERGENCY KIUT, BECAUSE ANYTIME THE SPEAKERS MAY NOT WORK. HOW TO RECTIFY IT.

    ANOTHER PROBLEM IS , IF I AM USING NIMBUZZ, SOME EXTR UNBEARBLE NOISE IS COMING AND IMMEDIATELY IT WILL HANG. HENCE WE HAVE TO RESET. WHILE OTHER PHONES LIKE NOKIA E63, E71 ARE WORKING FINE WITH NIMBUZZ, THIS IMATE 9502 ONLY HAVING THIS PROBLEM. ANY SOLUTION IS THERE

    ReplyDelete
  6. Digitally Yours...December 5, 2009 at 3:39 AM

    Nathan

    I think you haven,t read my blog...I have already posted the windows 6.5 rom above....
    The above rom do contains the telstra features....so try with this

    ReplyDelete
  7. Digitally Yours...December 5, 2009 at 3:48 AM

    FOR ULTIMATE 9502

    Mate you need to upgrade the device with windows 6.1...I have posted it...All you need is the rom unlock code which you must be having written on the box

    ReplyDelete
  8. AnonymousDecember 5, 2009 at 5:56 AM

    is there any WM6.5 for my Ultimate 8502 (that've already upgraded to WM6.1 from it's original OS WM6.0)?

    ReplyDelete
  9. Digitally Yours...December 5, 2009 at 8:14 AM

    Hi well not many are working in that direction......I am trying from my end but it require lot of time and i am not able to give that much.....However keep visiting the blog i may upload it

    ReplyDelete
  10. zeeDecember 13, 2009 at 4:22 PM

    thanks man downloaded the rom for wm6 its ok. i had issues or would i say problems upgrading my jasjam had a telstra rom installed.

    ReplyDelete
  11. UnknownFebruary 7, 2010 at 8:28 AM

    i have a i-mate 9502 with winows6.1 as OS i want to upgrade it to 6.5 is it possible.

    ReplyDelete
  12. josephFebruary 11, 2010 at 10:18 PM

    if it is possible to upgrade i-mate 9502 to W6.5, please give the details also

    ReplyDelete
  13. AnonymousFebruary 21, 2010 at 6:53 PM

    I have i-mate 9502 with wm6.0 pro upgrade to wm6.1 pro. So, i,m want to more upgrade to windows mobile 6.5 original,Please

    ReplyDelete
  14. AnonymousMarch 17, 2010 at 4:12 AM

    Does anyone know if the i-mate 9502 has speaker problems? or is it because of some software compatibility problems? I have purchased an i-mate from ebay (seller claimed it to be new) but it has no sound at all. I tried doing a soft and hard reset but did not help. It is running WM6.1. Any ideas or suggestions anyone? Thanks

    ReplyDelete
  15. seanMarch 26, 2010 at 8:00 PM

    hi my imate 810f keeps losing its connecting mobile optus , have to reboot but will only last a few minutes, is this a phone prob or sim

    ReplyDelete
  16. AnonymousMay 15, 2011 at 1:50 AM

    i tried to upgrade jasjam but as soon as i click n Allow in boot mode the device gets disconnected :( am doing this on win 7 should i use XP ?

    ReplyDelete

Subscribe to: Post Comments (Atom)